This Tilt and Swivel and Articulating Dual Arm for most 32" - 55" PLASMA LCD TVs FLAT PANEL . A very slim profile holding your display less than 4" from the wall with the flexibility of up and down 15 degree tilt if needed. Th mount is a solid and sturdy construction and one of the best mounts available in the market. It is easy to install and comes with minimum required tools and hardware required for installation . Professional Mount with Ultra Smooth Movement Designed for 32" - 56" Displays Maximum Weight Capacity: 165 lbs. (75 kg). Cantilever arm extends screen up to 26" away from the wall. Mounting holes: 28" wide (680mm) X 18" tall (460mm) 19" Wall plate supports 16" & 18" wall studs Durable Glossy black finish. Cable management on arm. Printed instructions and all necessary mounting hardware included.
Universal Design Fits Most 32"-56" Display Up To 165LBS
Support VESA 200x100 mm up to 680 x 400.
Arm Extend To 26" Fold To Less Than 4" . Cable management on arm
Dual arm Swivel 90 degree left or right and Tilt 15 degree up or down
Plasma and LCD Articulating Arm Wall Mount
Review Date: January 10, 2007
Reviewer: K. Von Seggern, LI, NY, USA
Very good product. East to install and heavy duty. The articulating arm works well and can be moved easily.
Works well for 52 in Samsung
Review Date: March 9, 2008
Reviewer: jpender, Florida United States
I wanted an articulating mount for no other reason than for ease of dealing with cables. The TV stays in one position and is only moved when cables need to be attached. That being said, this mount has worked wonderfully for such a large TV. The installation took less than an hour start to finish. It took two tries to mount the TV. We put the mount on the wall and left it the way that it came from the box. When we put the TV on it, the TV had a definite sideways lean to it. There are three attachment points on the wall plate for the articulating arm - right, left and center. Out of the box, the arm is attached to one of the side positions allowing for the maximum range of movement. To fix the lean issue we moved the arm to the center position then re-mounted the TV. It looks great now. Overall this is a pretty good mount - especially for the price.
Digicom PMA-772 TV Mount
Review Date: December 1, 2007
Reviewer: Bill Burr, Clifton, NJ
Purchased this item for my Toshiba REGZA 42" LCD TV and have been very satisfied. It seems to support the weight of my TV just fine, and articulating movement is very fluid. The only downside is the installation of the mount cost me almost as much as the item itself.
Graet item great price thanks 47 st photo
Review Date: December 12, 2007
Reviewer: THG, New York
i bought a 52" samsung TV from best buy they tried to sell me a similar mount for more than twice the price. i was sceptical at first because of price differance, but i bought it and it was relatively easy to install and it is nice and sturdy.
Very good solid articulating Plasma & LCD TV wall mount
Review Date: February 5, 2008
Reviewer: G. G. Galang, San Francisco, CA USA
I just installed this with my Samsung LNT4065F LCD TV and it's solid. I was a little hesitant at first but after reading the reviews, I was more at ease.
Cons:
All the hardware was included. However, the washers did not fit so I had to get some on my own.
If you want it flat against the wall, this does stick out more than a simpler wall mount.
Instruction manuals could be improved for flow/readability.
Doesn't look as pretty from the back if you have light colored walls.
Pros:
Feels very solid.
You get a lot of viewing angles
Easy to install even with the instruction manual shortcomings.
I would recommend this again - but make sure you have wall studs and your TV is compatible.
Plasma and LCD Articulating Arm Wall Mount
Leave a Reply